Install led flashers on 2005 S3 1050
Results 1 to 3 of 3
  1. #1
    Noob! Gary67's Avatar
    Member #
    15746
    Join Date
    Jun 2017
    Location
    Antwerp,Belgium
    Posts
    6

    Install led flashers on 2005 S3 1050

    I want to switch to LED flashers, but don’t know what type of relay I should buy.
    Stock is 4- pins
    I bought a CF14-JL02 type, but that has only 3 pins and the flashing frequency is high, just as with the original.
    I’ve read on this forum that some people have used a ‘EP35’ type, but that also has only 3 pins.

    Did anyone what type/ brand with 4 pins to buy?
    thanks

  2. #2
    The "Friends" of Officer Frank Poncherello Bad Santa 1050's Avatar
    Member #
    289
    Join Date
    Apr 2007
    Location
    Lake Macquarie, NSW, Australia
    Posts
    6,173
    I bought this one off ebay - item #: 132815807126 .

    Note, at first it didn't work. After some frustrated drinking and reading I discovered the polarity of the "B" and "E" pins were in the reverse order if what the bike uses, so I crossed them back over using wires and blade terminal connectors. Worked perfectly ever after.
    I'm a cheapskate, and was not prepared to spend $35 to $45 on specialised LED flasher relay from the local auto parts store.

    Sent from my SM-G960F using Tapatalk

  3. #3
    Noob! Gary67's Avatar
    Member #
    15746
    Join Date
    Jun 2017
    Location
    Antwerp,Belgium
    Posts
    6
    Thanks Santa,

    I just realized that I had pulled the wrong relay ; stock is indeed 3 pins.
    Installed the CF14 that I have and it works now.
    CF14 is same as CF13 , but inversed polarity.

    problem solved

 

 

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •