[Beach Triple]

http://cgi.ebay.com/ebaymotors/Moto...ItemQQcategoryZ35603QQitemZ170091246156QQrdZ1

These were waiting for me when I went home for lunch today. I didn't want to spend the $80 each for the CRGs so I thought I'd give these a try, $60 for the pair. Seem to be a nice make, just a simple design, similar to the CRGs. I attached one for the ride back to work and it worked well. The mirror is pretty convex so that will take some getting used to, objects are definitely closer than they appear.

 

[J-Pip]

icsstfu:

Looks ok from the Ebay pics, How are they on Speedy? Is 3" bigger or the same size as CRG's?

 

[thegoat]

They look just like CRG`s older version to me.I have `em.

 

[Avi8or]

Motrax bar ends. No problems with my pair.

 

[APtech77]

CRG/LS

 

[Beach Triple]

They're are a 3" mirror, and look great on the Trip, almost identical to the CRG's. Did about 120 on the way to work this morning and they didn't move, so that's reassuring.
Does anyone know the thread size for the stock mirrors? I need a bolt to replace the right side mirror since it also holds the brake reservoir on.

 

[vinnyf]

The holes are M10 1.25 thread, about 10mm long. Many have found that the plastic bolts used for bicycle disk brake conversions work, but some have expressed doubt about the plastic holding the resevoir.

These are available, but not in black:
http://www.discbrakeadapters.com/fs_show_item_details.php?item_id=5

 

[vinnyf]

...and if I'd read the description in my own link (last post), I would have seen that they are ONLY available in black. :sign5:

 

[prizontatt]

according to Kuhlka, you loosen the allen screw then tap it with a hammer... tappity tappity tap it in, just taaaap it in

 

[velodiesel]

And tapping it in helps the end actually come off? I just don't want to mess anything up. Thanks for your help.

 

[velodiesel]

It worked! Thanks a million, I really appreciate it!

 

[prizontatt]

anytime :drink: :drink:

 

[MONKEYHANGER]

I second that comment Av. 100% vibility and look good too.

MH

Motrax bar ends. No problems with my pair.

 

[DocPup]

according to Kuhlka, you loosen the allen screw then tap it with a hammer... tappity tappity tap it in, just taaaap it in

who would like to challenge the golf-baller-wacker-guy!!!!!

 

[mongo]

$12aud bar end mirror from the push-bike store up the road!!

 

[w00ht]

CRG/LS

+1

They don't vibrate, they work great. don't buy the copy's just buck up and get the real deal.

 

[APtech77]

:sign5:

 

[kneedragger]

$12aud bar end mirror from the push-bike store up the road!!

Any pics???

 

[HARVEE]

got this the other day i did have rizoma impulse mirrors on they were better than stock but still to much elbow in view. this is elbow free well made and kind of goes with the headlights .

 

[prizontatt]

nice man, looks good!! :drink: Where'd ya get them/ how much?