It's easy, when lifting from the chain side its super easy. While it's on the side stand, put the stand in the axle ( if it doesn't fit you're going to have to scrape all the black stuff out of the axel, it's put there for some reason and it's a bitch to get out. But most likely you'll have to do it use a heavy grit sandpaper over a dowel ) Then when it's all the way in, ease it off the side stand till both rear stand wheels are on the floor. Then push down. The other side isn't as stable.
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.