Triumph Speed Triple Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
32 Posts
Discussion Starter · #1 ·
Quit working on my wifes 02 Speed Three.
Just the speedo and Odo.

Is there a sensor besides the one on the front axle.
If so has anyone here fixed or replaced one.

I don't have a repair manual. (ya, I know, Go Buy One Cheap Fuck!)

Thanks, and hurry the fuck up with responses!!

Bob
 

·
Registered
Joined
·
7,370 Posts
I fixed this by reloading a tune to the ECU with my Tuneboy. Your local dealership should also do this under warranty. Its usually caused by a low battery or loose ground connection which causes errors on the ECU. A reflash (reloading a map) should fix it.
 

·
Registered
Joined
·
32 Posts
Discussion Starter · #3 ·


The Bike has 17000 miles on it and is out of warrantee. I do have a friend that can flash a new code in though., Thanks, Bob
 

·
Registered
Joined
·
7,370 Posts
Two possibilities generally; speedo sensor is mucked up/broken or your ecu needs a reflash. The front wheel speedo sensor on my bike actually had one of the plastic notches snap off and the inner metal sleeve siezed up pretty good. If you have the tools to take your front wheel off, check your speedo sensor to see if it is in need of lubrication or if anything has happened to the cabling and connections. Otherwise, if everything looks clean and operational, you'll probably need your tune reloaded onto the ECU.
 
1 - 6 of 6 Posts
Top