Triumph Speed Triple Forums banner

Stock Exhaust Weights

1354 Views 9 Replies 2 Participants Last post by  mark99
G
I took of the stock header/collector with TORS and removed the Pre cat (cheers Dev).

The weights of complete exhaust with TORS is 23.58 lbs.

Each TOR is 6.5 lbs.

Mark
1 - 10 of 10 Posts
G
Good work.

The stock mid-pipe is 4 pounds.
G
3.13 ounces to be anal. ::)

I used a calibrated digital gauge ;D

Mark
Mark,
By all means be anal. I like exactness and appreciate someone who goes to lengths to get things right.
Fred
G
OOPS! I rounded up a bit.  :D
G
SAI not including reed valves weighs 14 ounces. (True).

I'm getting silly now!

Mark
How much is it WITH the reed valves and did you get a chance to weigh the SAI block-off plates?
G
Sorry never weighed the reed valves, nor blanking plates, I'm guessing one (blank plate heavier than the plastic connectors) would cancel out the other (reed valves).

Mark
Yeah, but the plates are almost definitely less than a lb. I know the solenoid alone on my 03 was nearly as heavy as all 3 plates when I held both in either hand.
G
No I mean the blanking plates = same weight as reed valves. ;D

The SAI assembly is 14 ounces. So by junking it + blanking you lose nearly 1lb.

Interesting I just weighed TORS and the Stock Silencers - they weigh almost the same , even thogh stockers are bunged right up with mesh.

Mark
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top