http://www.thespeedtriple.com/Forums/index.php?topic=9333.0

 

Welcome Adam...........

With the ignition (but not the engine) on,
press and hold down ALL 3 buttons for 4 seconds.
At this point, the speedometer reading will start flashing a single digit number - usually 2.
Using the scroll button, that number cycles between 1 and 3, with 1=kph, 2=mph and 3=mph as well.
Pressing "set" sets the desired mode.
1: kph/liters
2: mph/UK mpg
3: mph/US mpg

 

Multiply miles by 1.609344

 

thanks to all, I have got that. I made it manually but please read bellow.

I was trying to make it according to Your messages but it didn't work. I was trying to investigate why, and whats the problem. I put the speedo a part, it was dirty inside and I saw some old water signs. I cleaned all with "electric contactor" spray and I sa one PROBLEM:

There are three buttons to change the display and functions.
The middle one "set" doesnt make the "click" when You press one.

does any one know if it is easy to repair that? where to buy the micro switch, is it possible to make it at home??
any news should be helpfull.

maybe I will start a new post regarding that problem...
thanks
ADAM

 

Or you could do a search. :buttkick:

 

or you could read the post... :buttkick:

 

http://www.thespeedtriple.com/Forums/index.php?topic=10475.0

Try this one. :eboy: