Motoscope CAN-bus
Motoscopes signal adaptor... says for '11 models but AFAIK the electrical system is unchanged from the late model ECU, can someone confirm?
This little brain box would be good for just about any gauge cluster..
Xenogenesis
Motoscope CAN-bus
Motoscopes signal adaptor... says for '11 models but AFAIK the electrical system is unchanged from the late model ECU, can someone confirm?
This little brain box would be good for just about any gauge cluster..
I think the main question is: does this box enable a 2008-2010 bike to start without gauges. If yes, then it is indeed a great solution for anyone wanting to do a gauge swap.
I think Motogadget previously had a similar box for their own gauges for the Bonnie, but it failed to satisfy the ECU at startup. So the Bonnie guys who were doing gauge replacements had to hide the original gauges on the bike, in order to make things work.
I think Motogadget previously had a similar box for their own gauges for the Bonnie, but it failed to satisfy the ECU at startup. So the Bonnie guys who were doing gauge replacements had to hide the original gauges on the bike, in order to make things work.
Right now they're running tests on 2005-2012 (exc. 2011) Speedies and 2008-2012 (exc. 2010) Streeties. They were looking for test bikes/riders just recently: for those who understand german
JoE.
JoE.
Confirmed from MotoGadget, not good for any gauges. The Triumph box they sell will convert Triumph CAN & gauge signals to their own MotoGadget CAN signals. Suitable only for their Motoscope Pro gauge. I also would have liked the box better if it converted Triumph CAN to old school pulse signals.
Still to be tested if the box alone will enable 2009 bikes to start and run normally.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
